This product is a transparent light oily liquid with freezing point of -30℃, boiling point of 220℃ (0.15Kpa), ignition point of 200℃, viscosity of 40 mPa.S (25℃), refractive index of 1.885 (25℃).Soluble in most organic solvents.
1. Plasticizer - JD81 Introduction
Plasticizer JD81 is made from natural plant oil with new biotechnology. It is
produced through specific process of purifying linseed oil derivatives and saturating unsaturated bonds which may affect intermiscibility and stability. This product is better compatible with PVC resin than DOP and has high level of plasticizing efficiency,with
high mechanical property, processability,stain resistance and weather resisting property. Especially,it has better cold resistance.JD 81 can replace DOP to be well applied in all kinds of PVC soft products.
2. Plasticizer - JD81 Application field
This product meets REACH standard and passes the tests of ROHS and 16P by SGS.
JD81 can be widely used in PVC calendering, extruding and molding products and all kinds of soft,semi-rigid such as artificial leather,rubber andplastic,toys,packaging film,printed film,medical ware,PVC gloves,foam sheet,foam,tube,textilene and cable granulation.etc.
3. Technical Specifications
Transparent light oily liquid
Color Shade, Pt-Co, # ≤
Acid Value mg KOH/g ≤
Flash Point （Open Cup）℃ ≥
Density 20℃, g/cm3
Moisture, % ≤
Package: 200kg/Iron Drum,1000KG/IBCTANK,22mt/Flexitank
Storage: over 1 years normally
Mechanical property of product, compared with common plasticizer
Tensile strength, MPa
Low temperature brittleness Tb,℃