Epoxidized Soybean Oil For Plasticizer

Epoxidized Soybean Oil For Plasticizer
Product Details

Epoxidized Soybean Oil for plasticizer

————ESO————

ESO is finely produced from high quality natural raw materials and has passed the toxicity tests of Disease Control Center, Shanghai Food and Drug Administration and SGS.

Properties:

ITEMS

STANDARD

Appearance

Light yellow oily liquid

Epoxy Value, % min(ASTMD 1652-04)≥

6.6

Color Shade, Pt-Co, # ≤

170

Acid Value mg KOH/g ≤

0.5

Iodine Value(%)≤

5.0

Flash Point  (Open Cup)℃ ≥

280

Density 20℃, g/cm3

0.988-0.998

Moisture, % ≤

0.2

Epoxidized Soybean Oil is soluble in hydrocarbon compounds, ketones, esters, higher grade alcohols and other organic solvents, slightly soluble in ethanol as well.

Epoxidized Soybean Oil is the most widely used PVC nontoxic plasticizer and stabilizer. It is particularly consistent with PVC and has low volatility and mobility. Its high thermal stability, light stability and good resistance to water and oil endow the products with better mechanical strength, weather resisting property and electrical property. Its non-toxicity makes it the internationally acknowledged chemical aid for foodstuff wrapper.Epoxidized Soybean Oil can be applied to all PVC products, such as, foodstuff wrapper, medical ware, pellicle, sheet material, tubular goods, sealing plate of icebox, artificial leather, floor leather, wire and cable material, plastic wallpaper and other daily use plastic products. It can also be applied to making special printing ink, oil paint, coating material, synthetic rubber, and liquid compound stabilizer and so on.


Usage and Dosage:

Jointly used with polyester plasticizers, it can reduce their mobility, while with metal heat stabilizers, it would greatly enhance their stability, and the dosage of these metal stabilizers necessary can be reduced to only one third of that used alone. As far as compatibility with PVC, ESO is equivalent to DOP and is better in terms of plasticizing efficiency. Thus the total need of plasticizers would be less. It does not only bring down the cost, but also improves the technical standard of our products, such as the tolerance of impact, transparency, printability, weld ability and so on. 5~10 portion of ESO would remarkably ameliorate the heat and light stability of soft products. Under special situation, 10~30 portion of ESO used non-open-air, no other stabilizers is necessary. The addition of this chemical, will cut down the amount of other plasticizers, stabilizers and lubricants needed.

 

Package: 200kg/Iron Drum,1000KG/IBCTANK,22mt/Flexitank

Storage: over 1 years normally



Hot Tags: epoxidized soybean oil for plasticizer, China, manufacturers, suppliers, factory, products, soybean oil structure, Plasticizer, epoxy plasticizer, Ca-Zn Stabilizer, epoxidized soybean oil manufacturing process, green energy biofuels
Feedback

You Might Also Like