Mcpa / 2-Methyl-4-Chlorophenoxyacetic Acid 25%Ec, 40%Ec

Mcpa / 2-Methyl-4-Chlorophenoxyacetic Acid 25%Ec, 40%Ec
Product Details
We will continue to give full play to the leading technological advantages of epoxy soybean oil, where to soybean oil, green energy biofuels, and strive to lead the development of the industry with continuous innovation. We always adhere to the difference strategy to serve the global market with the best quality products. Over the years of development, we have always adhered to the corporate philosophy of truth, quality and win-win.

EPOXY FATTY ACID METHYL ESTER

Standard: accordant to Q/JAAO2012-018

ITEMS

STANDARD

J107

J108

Color Shade (pt-co)

=150

=80

Epoxy Value (%)

ASTMD1652-04

4.1

4.6

Density (20?, g/cm3)

0.915-0.938

0.925-0.945

Iodine Value (%)

6.0

Acid Value(mg KOH/g)

=0.5

Moisture Content(%)

=0.5

Flash Point (?)

=170

=175

Usage and Dosage:

Jointly used with polyester plasticizers, it can reduce their mobility, while with metal heat stabilizers, it would greatly enhance their stability, and the dosage of these metal stabilizers necessary can be reduced to only one third of that used alone. As far as compatibility with PVC, ESO is equivalent to DOP and is better in terms of plasticizing efficiency. Thus the total need of plasticizers would be less. It does not only bring down the cost, but also improves the technical standard of our products, such as the tolerance of impact, transparency, printability, weld ability and so on. 5~10 portion of ESO would remarkably ameliorate the heat and light stability of soft products. Under special situation, 10~30 portion of ESO used non-open-air, no other stabilizers is necessary. The addition of this chemical, will cut down the amount of other plasticizers, stabilizers and lubricants needed.

Package: net weight 200KG iron drum, 1000KG IBC tank or Flexi-bag in Bulk

Storage: over 1 years normally


We not only pay attention to the market adaptability of Mcpa / 2-Methyl-4-Chlorophenoxyacetic Acid 25%Ec, 40%Ec, but also pay more attention to the market adaptability of internal management mode. We will develop with passion, pragmatism, unity and innovation as always. We firmly believe that a good reputation comes from high-quality products as well as professional and thoughtful service.
Hot Tags: low-price eco-friendly plasticizer dop dbp substitute epoxy fatty acid methyl ester efame j101 from factory, China, manufacturers, suppliers, factory, products, soybean oil, Environmental plasticizer, fatty acid ester, Epoxy Soyabean Oil, eco-friendly materials, soybean manufacturing process
Feedback

You Might Also Like